Omron FQ-CR2 User Manual

Outputting/Controlling with Ethernet
FQ-CR2 User’s Manual
139
8
Communications with External Devices
Data Acquisition/Setting Commands
● FILTERDATA or FD
Acquire Filter Setting Information
This command acquires the filter type and filter size
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
External reference data Specifies the external reference data number
Refer to 10-2 External Reference Parameters (p. 168) for details.
Acquired value Responds with specified filter setting.
Refer to 10-2 External Reference Parameters (p. 168) for details.
FI DA AT CR LT RE
External reference data (max. 3 digits)
External reference data (max. 3 digits)
Delimiter
or
DF CR

Delimiter
Space
(0×20)
Space
(0×20)
Command
Command
CR
Acquired
value
Delimiter
CR OK
CR ER
Delimiter
FQ Sensor User Manual.book 139 ページ ２０１１年７月８日 金曜日 午後２時３０分

Omron FQ-CR2 Specifications

General

Brand	Omron
Model	FQ-CR2
Category	Barcode Reader
Language	English