Omron FQ-CR2 - Acquires the Latest Error Code

Outputting/Controlling with Ethernet
146
FQ-CR2 User’s Manual
● ERRGET
Acquire Error Information
This command acquires the latest error code from the Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Error code Returns the latest error code. If there is no error history, the response is 00000000.
Refer to 9-1 Error Table (p. 154) for details.
ER CR RG TE
Command
Delimiter
00 0 CR 00 000
Delimiter
Model
CR OK
Delimiter
CR ER
Delimiter
FQ Sensor User Manual.book 146 ページ ２０１１年７月８日 金曜日 午後２時３０分