Omron FQ-CR2 - Acquires the Version Informa

Outputting/Controlling with Ethernet
144
FQ-CR2 User’s Manual
Setting Acquisition Commands
● VERGET
Acquire Software Version
This command acquires the version information of the Sensor software.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Software version Returns the software version.
Example: When the software version is 1.30, the response is 1.30.
Date Returns the date.
Example: When the date is 01 July 2011, the response is 2011/07/01.
V E / S CR R G T E
Parameter Command
Space
(0×20)
Delimiter Delimiter
or
CR RV
1 . 1 13 0 2 0 7 / 0 1/ 0
Date
Software version
Space
(0×20)
CR
Delimiter
CR OK
Delimiter
CR ER
Delimiter
FQ Sensor User Manual.book 144 ページ ２０１１年７月８日 金曜日 午後２時３０分