3-19
3 Connecting to Mitsubishi PLCs
NB-series Programmable Terminals Host Connection Manual (V108)
3-3 Communication Setting
3
3-3-7 When Using Mitsubishi Q_QnA (Link Port) Communication Protocol
The Switch1, Switch2 and Switch5 can be set as shown below if the CH1 RS232 communication
parameters and Station No. are set to 19200/8/Odd/1 and 0 respectively:
The difference between Mitsubishi Q_QnA (Link Port) protocol and Mitsubishi Melsec Q protocol:
• Mitsubishi Q_QnA (Link Port) protocol features fast communication speed.
• Mitsubishi Melsec Q protocol features slow communication speed.
Setting Switch
Switch 1
Switch 2
Switch 5
07E6
0005
0000
19200/8/With/Odd/1
Mode = Form 5
Station No. = 0
Setting
Value
Setup Description
To Next Page
Loading...
Need help?
General
