Need help?Do you have a question about the Omron NB7W-TW**B series and is the answer not in the manual?
General| Display Size | 7-inch |
|---|---|
| Resolution | 800 x 480 pixels |
| Display Type | TFT LCD |
| Touchscreen | Resistive |
| Communication Ports | RS-232C, USB, Ethernet |
| Serial Port | RS-232C |
| Ethernet | 10/100BASE-TX |
| Memory | 128 MB Flash |
| Protection Rating | IP65 (front panel) |
| Backlight Life | 50, 000 hours |
| CPU | 32-bit RISC processor |
| SD Card Slot | Yes |
| Humidity | 10% to 90% (non-condensing) |
| Shock Resistance | 147 m/s² (15G) |
| Certifications | CE, cUL |
| Storage Temperature | -20 to 70°C |
| Vibration Resistance | 10 to 57 Hz: Amplitude 0.075 mm, 57 to 150 Hz: 9.8 m/s² (1 G) |
Provides a comprehensive list of supported PLC models across various manufacturers.
Explains the Modbus protocol, including its functions, data areas, and error checking.
Provides an example of configuring the NB Unit to act as a Modbus Slave.
Demonstrates how to establish a connection using the Modbus TCP protocol.
Shows an example of connecting E5CC/E5EC and 3G3MX2 using Modbus RTU Extend Protocol.
Illustrates an example of connecting a Power PMAC Motion Controller using Modbus TCP Slave Protocol.
Explains the notation symbols (WARNING, Precautions for Safe Use, Precautions for Correct Use, Note) used to highlight safety information.
Describes the meaning of symbols used in safety precautions, such as prohibition and warning symbols.
Consolidates critical safety measures for unpacking, installation, power supply, grounding, and touch panel operation.
Covers precautions for handling, disposing of units/batteries, cable/connector use, and unit maintenance.
Guides users through configuring communication parameters for GE Fanuc PLCs.
Guides users through configuring communication parameters for Keyence PLCs.
Guides users through configuring communication parameters for OMRON Safety Controllers.
Lists the supported registers for OMRON Safety Controllers and their formats.
To Next Page