Omron NP Series User Manual

xvii
Notation and Terminology
The following notation and terminology are used in this manual.
Notation
Terminology
Reference Indicates additional information on operation, descriptions or settings.
CS1G-CPU@@-VI @ used in this manual indicates one character. For example, “CS1G-CPU@@-VI”
indicates CS1G-CPU42-VI, CS1G-CPU43-VI, CS1G-CPU44-VI and CS1G-
CPU45-VI.
PT In this manual, indicates an NP-series Programmable Terminal.
NP Series Indicates products in the OMRON NP@@ Series of Programmable Termi-
nals, unless otherwise specified.
PLC Indicates a Programmable Controller in the OMRON SYSMAC CP, CS/CJ,
C, or CVM1/CV Series of Programmable Controllers.
CP Series Indicates products in the OMRON SYSMAC CP Series of Programmable
Controllers: CP1L and CP1H.
CS/CJ Series Indicates Programmable Controllers in the OMRON SYSMAC CS/CJ
Series of Programmable Controllers: CS1G, CS1H, CS1G-H, CS1H-H,
CJ1G, CJ1M.
C Series Indicates products in the OMRON SYSMAC C Series of Programmable
Controllers: C200HX(-Z), C200HG(-Z), C200HE(-Z), CQM1, CQM1H,
CPM1A, CPM2A, CPM2C.
CVM1/CV Series Indicates products in the OMRON SYSMAC CVM1/ CV Series of Pro-
grammable Controllers: CV500, CV1000, CV2000, CVM1
Serial Communications Unit Indicates a Serial Communications Unit for an OMRON CS/CJ-series
PLC.
Serial Communications Board Indicates a Serial Communications Board for an OMRON CS/CJ-series or
CQM1H PLC.
Communications Board Indicates a Communications Board for an OMRON C200HX/HG/HE(-Z)
PLC.
CPU Unit Indicates a CPU Unit in the OMRON SYSMAC CP, CS/CJ, C, or CVM1/
CV Series of Programmable Controllers.
NP-Designer Indicates the OMRON CP-Designer (NP-NPDC0-V@).
Host Indicates a device such as PLC functioning as the control device and
interfaced with the NP-series PT.

Omron NP Series Specifications

General

Brand	Omron
Model	NP Series
Category	Touch terminals
Language	English