v
Introduction
Thank you for purchasing an NP-series Programmable Terminal.
NP-series PTs are designed to transfer data and information in FA production sites.
Please be sure that you understand the functions and performance of the PT before attempting to use
it.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems into production facilities.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and connecting FA systems.
• Personnel in charge of managing FA systems and facilities.
General Precautions
This manual provides information for connecting and setting up an NP-series PT. Be sure to read this
manual before attempting to use the PT and keep this manual close at hand for reference during instal-
lation and operation.
OMRON, 2008
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, o
by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o
OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-
stantly striving to improve its high-quality products, the information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility
for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
To Next Page
Loading...
Need help?
General
