Omron NS - Page 5

Advanced Industrial Automation
5
Outstanding Connectivity
Save time on programming and designing with Smart Active Parts
Unlike conventional visualization objects, Smart Active Parts communicate, across multiple networks, with their corresponding devices. They can
be used to configure, commission, operate and maintain these devices, without a single line of code needed to be written in the PLC or the HMI.
This allows you to add powerful functionality to your application within minutes.
Inverter
PLC
Temperature
Controllers
Inverter
NS
Vision
Sensor
Temperature
Controllers
CPU Bus
Units
and
Special I/O
Units
Vision
Sensor
260,000-colour
video input
Temperature
Controllers
CPU, I/O and Com-
munication Units
Remote I/O
Inverter
Servomotor
Servo Driver
Remote I/O
Terminal
Easy Access
Easy Access
Servomotor
Servo Driver
Easy Access
Easy-to-use Software
The NS-series HMI
makes it easy to connect
to the PLC and many
other devices and show
data data from them
without any PLC pro-
gramming.
With Smart Active Parts
you can support functions
to be performed on-site
without using Software
programs, like CX-Pro-
grammer or CX-Thermo.
1. Create a new project
3. Choose a Smart Active Part
4. Configure the communication
settings
2. Open the Smart Active
Parts Library
Click and Configure in four steps.
few minutes
5NS SERIES