In addition to RS-422 the following two other connection methods are available
to connect the PT to host computer. Connection through a B500-AL004(-P) Link
Adaptor allows connection to the RS-232C connector of a host computer.
Referto
AppendixCConnectionsUsingDifferentCableTypes
for moreinforma-
tion on these connection methods.
RS-232C
Use for connection to a host computer with a RS-232C connector.
Optical-fiber
Optical-fiber cable connections are used in situations where unstable commu-
nication occurs because of noise problems. Communication is possible up to
500 m through optical-fiber cable.
Connection Using RS-232C
or Optical-fiber Cable
Section 3-3
To Next Page
Loading...