Need help?Do you have a question about the Omron NT and is the answer not in the manual?
General| Brand | Omron |
|---|---|
| Model | NT |
| Category | Recording Equipment |
| Language | English |
Provides guidelines for positioning and handling the interface unit to ensure correct operation.
Describes the three command types for PT control by the host computer.
Details equipment and parts needed to configure the system for interface unit operation.
Outlines the procedure to follow before operating the PT with the interface unit installed.
Describes the names and functions of the RS-232C Interface Unit components.
Explains the methods for installing the unit and setting its DIP switches.
Details how to connect the PT with the RS-232C Interface Unit to the host computer.
Describes the names and functions of the RS-422 Interface Unit components.
Explains how to set the RS-422 Interface Unit rotary and DIP switches.
Details how to connect the PT with the RS-422 Interface Unit to the host computer.
Describes communication procedures and program flow for RS-232C.
Describes communication procedures and polling for RS-422.
Explains control and notification flow using commands.
Lists important points to consider when using commands.
Details operating commands sent from the host computer to the PT.
Details operating commands sent from the PT to the host computer.
Describes terminal commands for displaying information independently of PT screens.
Commands to initiate and terminate online data transfer.
Commands to specify data for transfer from PT to host.
Commands to inform the host about the type of data being transferred.
Commands for actual data transfer and result notification.
Details the structure and format of display history data records.
Explains the commands included in the sample programs.
Provides the actual BASIC code for a sample transfer/receive program.
Lists causes and remedies for errors during initial power-on.
Provides solutions for communication issues during operation.
To Next Page
