Omron NX-PG0122

3 - 7
3 Part Names and Functions
NX-series Position Interface Units User’s Manual (W524)
3-3 Terminal Blocks
3
Precautions for Correct Use
You can mount an NX-TB1 or NX-TB2 Terminal Block to a Position Interface Unit.
Even if you mount an NX-TB2 Terminal Block, which has a terminal current capacity of 10
A, the rated current does not change because the current capacity specification of the I/O
power supply terminals on a Position Interface Unit is 4 A max.
Additional Information
Refer to A-4 Terminal Block Model Numbers on page A-64 for the model numbers of the Termi-
nal Blocks.