Omron NX-SID800 Network Connection Guide

40
10 Programming Using IO-Link
10
Double-click start on the ladder, and click True.
11
If an error has occurred, the values of "0" to "7" changes.
In this example, error code "4F" is displayed.
The meaning of this error code is as follows.
Error description Troubleshooting
Cap erro
r
A
probable cause is that the cap has come loose. Attach the cap properly.
For details on error codes, refer to Safety Light Curtain/Multi-Beam Safety Sensor F3SG-
 SR  /F3SG-  PG  (Cat. No. Z405).

Omron NX-SID800 Specifications

General

Brand	Omron
Model	NX-SID800
Category	Controller
Language	English