3. Using the Unit
10
3.4
Using the Memory Function
The monitor automatically stores the result up to 60 sets. It can also calculate an average reading
based on the measurements from the last three readings taken within 10 minutes. If there are
only two readings in memory for that period, the average will be based on two readings. If there is
one reading in memory for that period, the average will be based on one reading.
Notes:
• If the memory is full, the monitor will delete the oldest readings.
• When viewing the reading taken without setting the date and time, “-:--” is displayed instead
of the date and time.
To Next Page
Loading...
Need help?
General
