3-42
3-3 Servomotor Specifications
OMNUC G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
3
Specifications
 3,000-r/min Servomotors (400 VAC)
The following graphs show the characteristics with a 3-m standard cable and a 400-VAC input.
• R88M-K75030F/C (750 W) • R88M-K1K030F/C (1 kW) • R88M-K1K530F/C (1.5 kW)
• R88M-K2K030F/C (2 kW) • R88M-K3K030F/C (3 kW) • R88M-K4K030F/C (4 kW)
• R88M-K5K030F/C (5 kW)
Note: The continuous operation range is the range in which continuous operation is possible.
Continuous operation at the maximum speed is also possible. However, doing so will reduce the
output torque.
4
0 1000 2000 3000 4000
5000
(r/min)
8
7.16 7.16 (3800)
2.39 2.39
(N • m)
Momentary operation range
Continuous operation range
Power supply voltage
dropped by 10%
2.6
1.6
(3500)
5
0 1000 2000 3000 4000
5000
(r/min)
10
9.55 9.55 (4200)
3.18 3.18
(N • m)
Momentary operation range
Continuous operation range
Power supply voltage
dropped by 10%
1.9
6.0
4.0
(3800)
7.5
0 1000 2000 3000 4000
5000
(r/min)
15
14.3 14.3 (3600)
4.77 4.77
(N • m)
Momentary operation range
Continuous operation range
Power supply voltage
dropped by 10%
4.0
(3200)
10
0 1000 2000 3000 4000
20
19.1
6.37 6.37
19.1(3700)
7.0
2.0
(3300)
Power supply voltage
dropped by 10%
(N • m)
Momentary operation range
Continuous operation range
5000
(r/min)
15
0 1000 2000 3000 4000
30
28.6 28.7(3400)
9.55 9.55
5.7
12.0
8.0
(3100)
Power supply voltage
dropped by 10%
Momentary operation range
(N • m)
Continuous operation range
5000
(r/min)
20
0 1000 2000 3000 4000
40
38.2
12.7 12.7
38.2(3100)
10
(2800)
Power supply
voltage dropped
by 10%
Momentary operation range
(N • m)
Continuous operation range
5000
(r/min)
25
0 1000 2000 3000 4000
50
47.7 47.7(3200)
15.9 15.9
15
(2800)
Power supply
voltage dropped
by 10%
(N • m)
Momentary operation range
Continuous operation range
5000
(r/min)
To Next Page
Loading...
Need help?
General
