Safety Precautions
22
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Maintenance and Inspection
Do not attempt to disassemble, repair, or modify the Servomotor or Servo Drive.
Any attempt to do so may result in electric shock or other injury.
After replacing the Servo Drive, transfer to the new Servo Drive all data needed to resume
operation, before restarting operation.
Equipment damage may result.
Turn OFF the power supply when not using the Servomotor or Servo Drive for a long period
of time.
Not doing so may result in injury or malfunction.
Design the system to stop for at least ten minutes after the dynamic brake operates.
If it is used under more conditions, the dynamic brake may break and the brake may not
operate.
Caution
To Next Page
Loading...
Need help?
General
