Digital Multicircuit Protector S8M 1
Digital Multicircuit Protector
S8M
Complete Flexible DC Circuit Protector That
Has a Wide Array of Displays, Alarm
Outputs, and Other Digital Functions.
• Four circuit protectors in one package
• Simple setting of current tripping values for each branch outputs
in 0.1-A units
• Startup and shutdown sequence control
• Display and alarm functions (Input voltage, output current,
run time, and over-temperature)
• Outputs conform to UL Class 2 (at 24 VDC, S8M-CP04-RS
only)
• DIN Rail mounting
• Free Support Tool available
Note: Refer to Precautions for Safe Use on page 20.
Model Number Structure
■ Model Number Legend
Note: Not all combinations are possible. Please refer to the list of models in Ordering Information below.
1. Communications
None: Not supported
R: Supported (RS-232)
2. UL Class 2 Output (at 24 VDC)
None: Not compliant
S: Compliant
Ordering Information
Note: For details on normal stock models, contact your nearest
OMRON representative.
Recommended Power Supplies
Note: When selecting the power supply, be sure to include the
internal power consumption of the S8M (approx. 10 W) and not
just the power consumption of the load.
12
S8M-CP04- @@
Communications UL Class 2 output Model number
None Not compliant S8M-CP04
Supported (RS-232C) Not compliant S8M-CP04-R
Compliant S8M-CP04-RS
Series name Model number
S8VS S8VS-06024@@
S8VS-09024@@
S8VS-12024@@
S8VS-18024@@
S8VS-24024@@
S8VM S8VM-05024@@
S8VM-10024@@
S8VM-15024@@
S8VM-30024C
S8VM-60024C
This Datasheet describes only the minimum setting operations required when using the S8M for the first time.
Refer to the S8M User's Manual (Cat. No. Z241), when making further settings.
To Next Page
Need help?
General
