11
EN ISO 10993-5:2009
EN ISO 10993-10:2013
EN ISO 13485:2016
EN ISO 14971:2019
EN ISO 15223-1:2016
EN ISO 81060-2:2014
RoHS Directive 2011/65/EU,
(EU)2015/863 and (EU)2017/2102
EN IEC 63000:2018
Operation and care
Cleaning of the device
The device should be cleaned with a soft dry cloth, or a soft cloth moistened with
neutral soap to clean on the monitor and the arm cuff.
• Do not use any abrasive or volatile cleaners.
• Use a soft dry cloth or a soft cloth moistened with mild (neutral) detergent to clean
your monitor and arm cuff, and then wipe them with a dry cloth.
• Do not wash or immerse your monitor and arm cuff or other components in water.
• Do not use gasoline, thinners or similar solvents to clean your monitor and arm
cuff or other components.
Maintenance
This device does not require any regular maintenance.
Storage
Keep your monitor in the storage case when not in use.
1. Remove the arm cuff from the monitor.
Caution! To unplug the air plug, pull on the plastic air plug at the base of the tube,
not the tube itself.
2. Gently fold the air tube into the arm cuff. Note: Do not bend or crease the air tube
excessively.
3. Place your monitor and other components in the storage case.
• Store your monitor and other components in a clean, safe location.
Do not store your monitor and other components:
• If your monitor and other components are wet.
• In locations exposed to extreme temperatures, humidity, direct sunlight, dust or
corrosive vapors such as bleach.
To Next Page
Loading...
