7
PM-1824-04-10/2019
Intended User
This unit is intended to be operated by adults who can understand this instruction
manual. Before using this device please refer to ‘Important Safety Precautions and
Warnings’ section of the instruction manual. This device shouldn’t be used by people
mentioned in these sections.
Indications for use
This device is a digital monitor intended for use in measuring blood pressure and
pulse rate in adult patient population.
Features (Particularities)
The M4 Intelli IT Automatic Upper Arm Blood Pressure Monitor is a clinically
validated device.
Key features:
Irregular Heartbeat Detection
2 users x 60 memories, + guest mode
Cuff Wrap Guide
OMRON Connect connectivity
Description of operating principle
The device operates on the oscillometric principle. It detects blood movement
through the brachial artery and converts the movements into a digital reading.
How to use the device
Follow IM2 for detailed instructions!
Main steps:
1. Prepare for a measurement. 30 mins before it you shouldn’t drink alcohol,
smoke, have a hot shower, consume hot beverages, eat or exercise. 5 minutes before
the measurement relax and rest.
2. Install the batteries.
3. Set the date and time.
4. Apply the arm cuff on the left arm. (On using the right arm instead, consult
Chapter 2.3 of IM1).
5. Sit correctly and place your arm at your heart’s level. Remain still and don’t
talk.
6. Select user ID.
7. Take the measurement by pressing the START/STOP button.
To Next Page
Loading...
