Omron Z - Page 19

General-purpose Basic Switch Z F-175
Limit
Switches
Reverse Hinge Roller Lever
Note: The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil springs and the pin plungers
are freed by operating the levers. Reverse-type models are highly vibration- and shock-resistive because the pin plungers are normally
pressed.
OF max.
RF min.
OT min.
MD max.
2.35 N {240 gf}
0.55 N {56 gf}
4 mm
0.64 mm
FP max.
OP
35 mm
30.2±0.8 mm
13.9
FP
4.2
+0.075
−0.025
25.4±0.1
49.2
9.2
17.45±0.2
20.2
18.65
11.9
17.4
40.6R
OP
Z-15GM2-B
4.36
+0.1
dia.
−0.05
t = 1 (stainless-steel lever)
4.2
+0.075
dia. hole
−0.025
9.5 dia. × 4
(plastic roller)