on networks N150R User Manual

10
2. Look for the preset On Networks WiFi network name (SSID), and
select it.The preset WiFi network name (SSID) is located on the
product label on the bottom of the router.
Note: If you changed the name of your
network during the setup process,
look for that network name.
3. Enter the preset WiFi network password (or your custom
password if you changed it), and click Connect.
4. Repeat steps 1–3 to add other wireless devices.
WPS Method
If your wireless device supports WPS (Wi-Fi Protected Setup), you
might be prompted to press the WPS button on the router instead of
entering the WiFi network password. If this happens:
1. Press the WPS button on the router.
2. Within 2 minutes, press the WPS button on the client device, or
follow the WPS instructions that came with your wireless device
to complete the WPS process. The device will then be
connected to your router.
3. Repeat this process to add other wireless devices.
Note: WPS does not support WEP security.
If you try to connect a WEP client to
your network using WPS, it will not
work.

on networks N150R Specifications

General

Brand	on networks
Model	N150R
Category	Wireless Router
Language	English