EasyManua.ls Logo

Onan Performer P220 - User Manual

Onan Performer P220
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Performer
Series
Printed
in
U.S.A.
965-0167
2-96
Question and Answer IconNeed help?

Do you have a question about the Onan Performer P220 and is the answer not in the manual?

Onan Performer P220 Specifications

General IconGeneral
BrandOnan
ModelPerformer P220
CategoryEngine
LanguageEnglish

Summary

Onan Engine Safety Precautions

General Safety Measures

Essential safety measures for engine operation and maintenance.

Fuel Flammability and Explosion Hazards

Hazards related to flammable and explosive fuel properties.

Exhaust Gas Toxicity Warnings

Risks associated with poisonous carbon monoxide exhaust gas.

Moving Parts Injury Risks

Dangers posed by rotating engine components and guards.

Battery Gas Explosion Dangers

Precautions for handling explosive battery gases and connections.

Introduction to Onan Performer Series Engines

About This Operators Manual

Overview of the manual's scope and purpose for engine operators.

Engine Model and Serial Number Identification

Guidance on locating and using engine model and serial numbers.

Onan Engine Fuel Recommendations

Gasoline Fuel Usage Guidelines

Guidelines for using clean, fresh, unleaded gasoline with 87 octane.

LPG Fuel Usage Guidelines

Recommendations for using HD-5 grade liquified petroleum gas.

Natural Gas Fuel Usage Guidelines

Guidance on using commercially available natural gas fuel.

Onan Engine Oil Recommendations

Selecting Engine Oil Viscosity Grade

Guidance on choosing the correct SAE viscosity grade based on ambient temperature.

Starting Batteries

Battery Capacity and Maintenance

Importance of battery capacity and cable size for engine starting.

Exhaust System Safety

Preventing Exhaust Gas Exposure

Dangers of operating engines indoors without adequate ventilation.

Engine Operation Guide

Pre-Operation Checks

Essential maintenance tasks to perform before starting the engine.

Engine Starting Procedures

Step-by-step instructions for safely starting the engine.

Engine Break-In Procedures

Controlled Break-In Process

Recommended steps for initial engine operation for optimal performance.

Operating in Different Conditions

Engine Operation in Dusty Conditions

Necessary maintenance adjustments for operation in dusty environments.

Engine Operation in Hot Weather

Key considerations for operating the engine in high temperatures.

Engine Operation in Cold Weather

Precautions and recommendations for operating in freezing temperatures.

Engine Storage and Service

Engine Protection During Storage

Procedures for protecting the engine during prolonged periods of non-use.

Steps to Return Engine to Service

Instructions for safely restarting an engine after it has been stored.

Periodic Engine Maintenance Schedule

Regular Maintenance Task Frequency

A schedule outlining the frequency of various maintenance operations.

Daily (8-Hour) Maintenance Checks

Fuel, Exhaust, and Cooling System Inspection

Procedures for checking fuel lines, exhaust system, and cooling fins.

Engine Oil Level Verification

Step-by-step guide for accurately checking and maintaining the engine oil level.

Engine Oil and Filter Replacement

Step-by-Step Oil and Filter Change

Detailed instructions for performing a complete engine oil and filter change.

Engine Adjustments

Reconnecting the Choke Cable

Instructions for correctly reconnecting a manual choke cable.

Adjusting Engine Speed Settings

Procedures for setting low-idle and high-idle engine speeds using a tachometer.

Onan Engine Troubleshooting

Engine Starting Issues (Crank;No Start)

Solutions for engines that fail to crank or start properly.

Engine Running Problems

Troubleshooting for common running issues like stopping, smoking, or misfiring.

Onan Engine Specifications

Model Series P216-P224 Specifications

Detailed technical specifications for the P216, P218, P220, and P224 models.

Key Engine Performance Data

Information on bore, stroke, displacement, compression ratio, and ignition timing.

California Engine User Information

Emissions Control Compliance for California

California-specific emissions regulations and control requirements for engine users.

Related product manuals