BLEEDING FUEL
SYSTEM
Bleed fuel system whenever the filtersare changed or
when there is air in the lines.
Procedure:
Manually actuate fuel transfer pump until air bubbles
are all out and clear fuel flows from the bleed valve
automatically, Figure
37.
If
the transfer pump cam lobe
is
on the high side, the priming lever
will not operate the pump. Rotate the flywheel one revOh!iOn
before operating the priming lever.
BLEED VALVE
FUEL
RETURN
CONNECT
FUEL
LINE
(
RDJE)
FIGURE
37.
BLEEDING FUEL
SYSTEM
29
To Next Page
Loading...
Need help?
General
