Wait for the Repeater’s Status LED
to turn o, then press and release the
Alert Indicator’s button. The indica-
tor’s LED will ash as follows:
• Green to indicate the Repeater
is in range and monitoring; tyres
within pressure and temperature
limits.
• Yellow if there is no connection
or out of range of the Repeater;
cannot detect tyre status.
• Red to indicate a fault, either
high/low pressure or temperature is
out of range; Indicator will beep for
10 seconds when tyre issue is seen
for the rst time. LED will continue
to blink red until fault is corrected.
Deep Sleep Mode
To place the Alert Indicator into deep
sleep mode, hold the button until
hearing one beep and then release it.
The Alert Indicator will emit a happy
tone and shut o.
NOTE: The Alert Indicator can only
enter deep sleep if not plugged in.
• Red followed by blue notes Indi-
cator is not linked to the Repeater.
Battery status indicators are as fol-
lows (regardless of LED color):
• 3 blinks - Good, full charge
• 2 blinks - Low, not full charge
• 1 blink - Critical, needs charging
7
To Next Page
Loading...
Need help?
General