One Control Tire Linc User Manual

When Stem Sensors are under
pressure, data is transmitted to the
Repeater when tyres are:
• moving/rotating, every one
minute;
• not moving/not rotating, every 15
minutes.
The Alert Indicator will continually
scan for tyre events from the Repeat-
er when it is plugged into a USB cable
connected to a powered USB port.
This conguration is best because
it will be the most responsive to tyre
events.
When not plugged into a powered
USB port, e.g., running on internal
battery, the Alert Indicator periodically
scans for data sent to the Repeater,
when tyres are:
• moving/rotating, every one
minute;
• not moving/not rotating, scan-
ning time increments in 1, 2, 4,
8 and 15 minutes (maximum),
with the Indicator entering sleep
between scans.
The Alert Indicator is provided to send
simple audio and visual alerts of a
tyre pressure or temperature event.
No additional programming of the
Indicator is required.
NOTE: The Repeater’s Status
LED will blink green, yellow or
red to indicate certain conditions.
The number of blinks of the LED,
regardless of color, also indicates
battery status.
Operation
6

One Control Tire Linc Specifications

General

Brand	One Control
Model	Tire Linc
Category	Security System
Language	English