7. Wait for the Repeater’s Status LED
to turn o, then press and release
the Alert Indicator’s button. The
indicator’s LED will ash as follows:
• Green to indicate the Repeater
is in range and monitoring; tyres
within pressure and temperature
limits.
• Yellow if there is no connection
or out of range of the Repeater;
cannot detect tyre status.
• Red to indicate a fault, either
high/low pressure or temperature is
out of range; Indicator will beep for
10 seconds when tyre issue is seen
for the rst time. LED will continue
to blink red until fault is corrected.
• Red followed by blue notes In-
dicator is not linked to the Repeater.
8. Battery status indicators are as
follows (regardless of LED color in
Step 7):
• 3 blinks - Good, full charge
• 2 blinks - Low, not full charge
• 1 blink - Critical, needs charging
5
To Next Page