One Control Tire Linc User Manual

III. After the Indicator beeps three
times, release the button. The LED
will blink green three times.
B. The Alert Indicator’s LED will
briefly blink blue and emit a happy
tone, indicating it has been linked to
the Repeater.
6. The Alert Indicator is now linked to
the Repeater.
NOTE: The Repeater’s Status LED
will indicate green, yellow or red to
indicate certain conditions (see Step
7). The number of blinks of the LED,
regardless of color, also indicates
battery status (see Step 8).
3. Release the Repeater’s Pair Mode
button.
4. Press the Alert Indicator’s button
(Fig.1A) once to make sure the
indicator is awake.
5. Within 10 seconds of waking the
indicator, press and hold the Alert
Indicator button.
A. Continue to hold the Alert
Indicator button until its LED and
buzzer sounds.
I. One beep will sound off and one
green LED flash will be emitted.
Continue to hold the button.
II. Two beeps will sound off and
the LED will blink green twice.
Continue to hold the button.
4

One Control Tire Linc Specifications

General

Brand	One Control
Model	Tire Linc
Category	Security System
Language	English