WWW.ONEFORALL.COM 9
With your ONE FOR ALL 3 Remote it is possible to change the mode of a
device key. This is useful if you want the ONE FOR ALL 3 to operate more
than one of the same device types such as two Televisions or two Video
Recorders for example.
Example: to program a second Television on the DVD key, you need
to change the DVD key into a TV key.
1 Press and hold down the MAGIC key until the red light
blinks twice (the red light will blink once then twice).
2 Press 9 9 2. The red light will blink twice.
3 Press the TV key (the device mode you want to duplicate).
4 Now press the DVD key (the device mode key you want
changed) and the red light will blink twice.
The DVD key of the ONE FOR ALL 3 is now ready to be set-up for your
Television. To enter the Set-up code for your second TV, proceed with the
setup procedure on page 6 remembering to use TV codes for the DVD key.
Resetting a Device Key
Example: to reset the DVD key back to its original mode.
1 Hold down the MAGIC key until the red light blinks twice (the red
light will blink once then twice).
2 Press 9 9 2. The red light will blink twice.
3 Press the DVD key (the device mode you want to reset).
4 Now press the DVD key again to confirm and the red light will blink
twice.
Now your DVD key of the ONE FOR ALL 3 is ready to be programmed for
your DVD player again. To enter the Set-up code for your DVD player,
proceed with the setup procedure on page 6.
Changing the Mode of a Device Key
To Next Page
Loading...
Need help?
General
