One for All 5 User Manual

36 WWW.ONEFORALL.COM
Trouble-Shootings
Problem:
Your brand is not listed
in the code section?
The ONE FOR ALL does
not operate your
device(s)?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
Video not recording?
The ONE FOR ALL does
not respond after
pressing a key?
The device key does not
blink when you press
a key?
Solution:
Try the search method on page 10.
A) Try all the codes listed for
your brand. B) Try the search
method on page 10.
You may be using the wrong
code. Try repeating the Direct
Set-Up using another code
listed under your brand or start
the search method over again
to locate the proper code.
Enter the programme number
exactly as you would on your
original remote.
As a safety feature on your ONE
FOR ALL, you must press the
Record key twice.
Make sure you are using new
batteries and are aiming the
ONE FOR ALL at your device.
Replace batteries with 2 fresh,
new “AA” alkaline batteries.
Helpful Hints

One for All 5 Specifications

General

Brand	One for All
Model	5
Category	Universal Remote
Language	English