One for All 6 User Manual

Now, aim the ONE FOR
ALL 6 at your device and
press
POWER. If your
device switches off, the
ONE FOR ALL 6 is ready
to operate your device.
Write the code for your device(s) in the boxes on page
27, for easy future reference.
Remember to press the correct device key before oper-
ating your device. Only one device (CD, amplifier, cas-
sette, etc.) can be assigned to a device key. If your
original remote operates more than one device (for
example, a receiver, CD player and cassette player in
one remote), you need to set up each device separately.
If your device does not respond, follow steps 1 through 5
with each code listed for your brand. If none of the
codes listed for your brand operate your device, then try
the search method described on page 11, even if your
brand is not listed at all.
■■■■
■■■■
10
5
Note: If your device’s original remote control does
not have a power key, press PLAY instead of
POWER when setting up your device.

One for All 6 Specifications

General

Brand	One for All
Model	6
Category	Universal Remote
Language	English