One for All 6 User Manual

■■■■
■■■■
20
Key Sequence
You can program your ONE FOR ALL 6 to issue a sequence of
commands at the press of a button. For example, you may
want to turn on your Satellite and TV at the same time then
set your TV to programme 5. Any sequence of commands you
regularly use can be reduced to one key stroke for your
convenience. You can install a sequence on any key, except
for the device keys (TV, VCR, SAT, CD, AUX1 and AUX2),
the Magic key and the Scan key.
To set up the sequence mentioned above on the Blue Fastext
key of your ONE FOR ALL 6:
Press and
hold down the MAGIC
key
until the red light blinks
twice.
Press
995.
Then press the
Blue Fastext key.
(This is the key to which the
sequence will be assigned.)
Next press
SAT, POWER, TV,
POWER, 05
(Enter the
programme number exactly as you
would on your original remote.).
To end the sequence,
press and
hold MAGIC
until the ONE FOR
ALL 6's red light blinks twice.
Whenever you press the Blue
Fastext key, the ONE FOR ALL 6
will turn on your Satellite, turn on
your TV then set your TV to
programme 5.
To install any sequence, press:
MAGIC* + 995 + Key to which sequence will be assigned +
Sequence of commands + MAGIC*
*Here you must hold down MAGIC until the red light blinks
twice.
1
2
3
4
5
6
SAT
TV

One for All 6 Specifications

General

Brand	One for All
Model	6
Category	Universal Remote
Language	English