Volume, Programme
The Volume and Programme keys control
the two most frequently used functions of
your audio and video devices. They
operate just as those on your original
remote.
Scan
The Scan key allows you to easily browse
through the programmes on your
Television, Video Recorder, Satellite
Receiver and Cable Converter. See page
16 for more information.
Video Recorder Keys
After pressing the VCR key, the Video
Recorder keys operate the functions of
your Video Recorder. To prevent
accidental recordings, the Record key
must be pressed
twice to start recording.
Teletext/Fastext Keys
After pressing the TV key, the top row of
the Video Recorder keys are used to
operate the main teletext functions. The
symbols above the keys are for teletext.
The Text keys are used to access the
teletext functions of your Television. Of
course, your Television must be teletext
capable. For an explanation of the
teletext symbols, please refer to page 19
of this manual.
After pressing the TV key, the bottom
row of the Video Recorder keys marked
red, green, yellow and blue allow you to
access the fastext functions of your
television. Again, your television must be
fastext capable to operate these functions.
For a more detailed explanation on how
teletext and fastext work, please refer to
the manual of your Television set.
■■■■
■■■■
5
SCAN
VOL
CH
C/P
To Next Page
Loading...
Need help?
General
