To program the basic code on your Essence remote, please follow the instructions mentioned
below:
1. Hold down MAGIC until the light blinks once and then twice and stays on.
2. Press the MODE key to select the relevant device key.
3. Enter the code, the light will blink twice.
4. You can now operate your device.
If the LED does not blink twice at the end, please try the following
1. Hold down MAGIC until the light blinks once and then twice and stays on.
2. Press the MODE key to select the relevant device key.
3. Enter 992, the light will blink twice.
4. Press the Magic key once, the light blinks once.
5. Press the Magic key again, the light will blink twice.
6. You can now set up the device code.
The Find your Setup Code Tool indicates that the code for my device is not in the memory of my
remote, what do I need to do?
To resolve this problem we can offer you the following two solutions:
1. Learning feature
2. Upgrade service
1. LEARNING FEATURE: Your One For All remote is capable of copying functions straight from the original
remote control that came with your device. To use the learning feature, please refer to the user manual
of your One For All remote control or read the related articles in our online knowledge base.
2. UPGRADE SERVICE: Because of the quick changing technology we can’t always ensure that the latest
codes will be stored in the memory of your One For All remote. Some codes will be created after the
release of the remote or the memory of the remote is limited, so that we choose only the most popular
codes. To ensure a working remote we offer the upgrade service, which is free of charge (for both
upgrade and postage back) within the first year of purchasing your One For All remote, provided you still
have the proof of purchase.
If your remote has been purchased more than 1 year ago, or if you do not have the proof of purchase
anymore, the upgrade service is still possible for an additional fee. If you would like to make use of this
service, then you need to send in your One For All remote control and our technicians will program the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
