x
2
O
nce you have Set-Up your URC-1625, you can blink back your
S
ET-UP CODE for future reference.
Example: To blink out your Television code:
1
Press tv once.
2 Press and hold down the magic key
until the red LED underneath the POWER key
b
links twice (the red LED will blink once
then twice).
3 Press 9 9 0. The red LED underneath the POWER key will
b
link twice.
4 For the first digit of your four-digit code, press 1 and
c
ount all the red blinks. If there are no blinks, the digit is
"
0".
5 For the second digit, press 2 and count all the red blinks.
If there are no blinks, the digit is "0".
6 For the third digit, press 3 and count all the red blinks.
If there are no blinks, the digit is "0".
7 For the fourth digit, press 4 and count all the red blinks.
If there are no blinks, the digit is "0". Now you have
your four-digit code.
Code Blink out
(To find out which code is currently programmed)
Quick Code Reference
Device Code
sat_________________________
tv_________________________
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
WWW.ONEFORALL.COM 7
Important notes:
- If your Set Top Box is not a standard BSkyB DigiBox, please follow
the steps above pressing “sat” instead of “tv” during step 2 to
blink out the code programmed in “sat” mode.
To Next Page
Loading...
Need help?
General
