7
Home
If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes individually.
To do this:
1.
Turn on your device (not on standby) and point the OFA remote towards it.
2.
To set up:
TV
Hold down TV Power and SKY Power until the Green LED under the Power key blinks twice.
AUDIO ¬RECEIVER, SOUND BAR
Hold down Volume + and Volume – until the Amber LED under the Power key blinks twice.
OTHER SKY / DIGITAL MEDIA BOX
Hold down Channel + and Channel - until the red LED under the Power key blinks twice.
3.
Enter the first 4 digit code listed for your brand (e.g. 4142 for Technika).
4.
The LED will blink twice.
5.
Now aim the remote towards your device and press the Power (or Mute*) key.
6.
If the device turns off (or mutes*), your remote is ready to use. If not, repeat steps 2-5 with the next code
in the list.
* If you are setting up an Audio Video Receiver or Sound Bar, please try the Mute key during step 5.
HOW TO SET UP YOUR REMOTE
B SETUP BY CODE
To Next Page
Loading...
