It is possible to change the mode of any device key. This is useful if you
w
ant to set up two of the same devices on the ONE FOR ALL 2. The code
c
an be set up using “Direct code set up” (p. 6) or “Search method” (p. 7).
To change a device key, see the three examples below.
Example 1) if you would like to program a second TV on the DVD key.
Example 2) if you would like to program a second DVD player / DVD-R
on the TV key.
E
xample 1:
T
o program a second Television on the DVD key (for example), you need
t
o change the DVD key into a TV key, so press:
(
*) (**)
The DVD key has now become a second TV key.
Now enter the Set-Up code for your second TV by pressing:
(*) (TV code) (**)
Example 2:
To program a second DVD player / DVD-R on the TV key (for example),
you need to change the TV key into a DVD key, so press:
(*) (**)
The TV key has now become a second DVD key.
Now enter the Set-Up code for your second DVD player / DVD-R by pressing:
(*) (DVD code) (**)
Resetting a Device key
Example: To reset the TV key to its original mode, press:
(*) (**)
Example: To reset the DVD key to its original mode, press:
(*) (**)
(*) Press and hold down the MAGIC key until the red light (LED)
blinks twice.
(**) The red light (LED) will blink once then twice.
Extra Features
Mode re-assignment
(
Changing a device mode)
To Next Page
Loading...
Need help?
General
