12 WWW.ONEFORALL.COM
The Learning Feature
-
Learning is mode specific. To access your learned function, you need to scroll to the
a
ppropriate device first.
- A learned function can be assigned to any key except the ENTER, LIGHT (ESC),
ARROW Left/Right keys and the MAGIC key.
-
If no key is pressed, the URC-7780 will stay for 30 seconds in programming mode.
-
After step 5 you have 15 seconds to press the corresponding key on your original
remote.
- If you learn a function on another key than the „custom keys“, the original
U
RC-7780 function automatically becomes shifted. You can press MAGIC then
t
he key to access it (this excludes the POWER, Channel and Volume keys and
Digits – Press MAGIC twice and then the digit to access it).
- If a Shifted Learned function is placed on the Power, Channel and Volume keys then
S
leep and Colour/Brightness will be sacrificed.
-
The Learning feature is mode specific. Therefore you can place one learned function
per mode on the same key.
- The URC-7780 can learn approximately 50 functions (depending on the original
r
emote).
-
You can replace a learned function by placing another learned function on top or by
using “Delete Learning from One Key”, “Delete Learning from One Mode”, “Delete
Learning from All Modes”.
-
Learning should not be done in direct sunlight or under incandescent lights.
-
Make sure you are using new batteries before following the learning instructions.
-
Upon changing the batteries, your learned functions will be retained.
- It’s not possible to program functions by learning in the Home Theatre mode.
H
owever, if a key has been programmed in the original device mode with learning
t
hen this function will be carried over to the Home Theatre mode.
Shifted Learning
Y
ou can also learn a function on a key of the URC-7780 without sacrificing the original
U
RC-7780 function. The „custom keys“ are an ideal location for this. A Shifted Learning
f
unction can also be put on almost any other key except for the following: MAGIC key,
ARROW Left / Right, Enter and LIGHT (ESC). To install a Shifted Learning function, simply
f
ollow steps 1-7 on the previous page. During step 5, press MAGIC once before you press
the key where you are placing the learned function. To access the shifted function, press
M
AGIC and then the key you have learned on. To access the shifted function on a digit
k
ey press MAGIC twice and then the corresponding digit.
To Next Page
Loading...
