One for All URC-9910 - Page 32

a. Press SELECT once to enter Playback Control
Group assignment.You will see the display change
to the last-selected device (e.g., [TV]).
b. Select a device for Playback Control Group assign-
ment.For this example,press VCRonce.This will
assign the entire group of Playback Controls (i.e.,
PLAY,STOP,FF,REW,F.FWD,F.REW,PAUSE and
REC) to the VCR.You will see the display change
to your device choice (e.g.,[VCR]).
c. Press SELECTonce to accept the assignment in
step 3b.You will see the display change to the next
Control Group assignment,[AUDIO]).
4. Press SELECTonce to enter Audio Control Group
assignment.You will see the display change to the
last-selected device (e.g.,[VCR]).
a. Select a device for Audio Control Group assign-
ment.For this example,press TVonce.This will
assign the entire group of Audio Controls (i.e.,
VOL+,VOL-,and MUTE) to the TV.You will see the
display change to your device choice (e.g.,[TV]).
b. Press SELECT once to accept the assignment in
step 4a.You will see the display change to the next
Control Group assignment,[CHANNEL]).
5. Press SELECTonce to enter Channel Control Group
assignment.You will see the display change to the
last-selected device (e.g.,[TV]).
continued on next page...
SELECT
SELECT
45
SELECT
SELECT
SELECT