KEY INDEX
DVD Player Functions (continued)
Use TV/VIDto switch the TV’s input to view
TV or DVD programs.
Use the transport keys to control
your DVD player.
After programming,press M1 ~ M3 once to
run a desired macro (see Using Macros on
page 34).
After programming,press L1 ~ L4
once to activate a learned function.
(See Using Learning on page 29.)
Use to turn on or off the key backlight.
When this feature is activated,keys will
remain backlit for 5 seconds after the last key
press.In the setup mode,backlighting
will remain on for 30 seconds.
Use SET for all programming sequences.
68
To Next Page
Loading...
