OneAccess 1645 - Safety Compliance; Over-Voltage and Over-Current Protection Compliance; EMC Compliance; Environmental Compliance

To Next Page

To Previous Page

1645 Chapter 4

User manual Technical specifications

4.10 Safety compliance

• EN60950-1: Safety of information technology equipment, including electrical business equipment.

• Devices with earth stud:

- Class I equipment (powered by Class II AC/DC adapter)

• Devices without earth stud:

- Class III equipment (powered by Class II AC/DC adapter)

4.11 Over-voltage and over-current protection compliance

The over-voltage and over-current protection complies with ITU-T K.44 and ETSI EN 300 386 recom-

mendations.

4.12 EMC compliance

•CE

• EN55022 B Emissions

• EN55024 Immunity

• EN61000-3-2 Harmonics

• EN61000-3-3 Voltage fluctuations and flicker

• EN61000-4-2 ESD

• EN61000-4-3 Radiated immunity

• EN61000-4-4 EFT/burst

• EN61000-4-5 Surge

• EN61000-4-6 Conducted immunity

• EN61000-4-8 Power magnetic field immunity

• EN61000-4-11 Voltage dips & drops

• EN300386 EMC Requirements

4.13 Environmental compliance

• Storage conditions: ETSI ETS 300 019-1-1 Class 1.1. In addition, the storage temperature has to be

between -25 to +70°C, with a relative humidity between 0 and 95% non-condensing.

• Transport conditions: ETSI ETS 300 019-1-2 Class 2.3.

• Stationary use conditions: ETSI ETS 300 019-1-3 Class 3.2. In addition, a relative humidity between

0 and 95% non-condensing and an ambient operational temperature between -10 to 50°C is sup-

ported.

• International protection (IP) class of protection against solid and liquids: IP30.