EasyManua.ls Logo

oneConcept V-15 - CD and USB Playback; Bluetooth (BT) Functionality; Bluetooth Streaming Setup

oneConcept V-15
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
EN
CD / USB
• Press On / Standby to switch the device on, then press MODE for the CD
mode or USB mode.
Press OPEN/CLOSE to open the CD tray and insert a CD with the printed
side facing to- wards you. CDs will be read in automatically. Insert USB
drives with music les into the USB slot on the top of the device.
Control playback with / / / .
For MP3 CDs or USB drives with folders: use the RIGHT/LEFT buttons (7 /
17) to toggle folders.
Play Mode
Press PLAY MODE to select one of the following play modes: REPEAT 1
(current track is repeated), REPEAT ALL (all contained tracks are repeated),
RANDOM (all tracks are played in random order). A corresponding icon is
shown on the display. Press PLAY MODE again to return to normal playback.
Program Mode
You can program a play list with up to 20 entries. Stop playback with and
press MEM. Press / to select the desired title and press MEM again.
Repeat this procedure up to 20 times and start playback with .
BT (NUR 10029363 & 10029364)
The BT function can be used to stream music from your smartphone /
Tablet, but does not allow the use as a hands-free kit.
Turn on the power and press MODE to select BT mode.
Activate BT on your BT device and connect to V-15.
Control media playback from your external device or with the buttons
/ / / .
Enter „0000“ if you are prompted to enter a password.
The unit automatically connects to the last connected BT device. To pair, press
and hold PAIR for 3 seconds. The BT LED ashes quickly: the unit is in pairing
mode.

Related product manuals