Getting started
Learn more about your device and start using it.
Setting up your device
Insert SIM card
1. Insert the SIM Tray Ejector into the small hole on the SIM card holder. Press the ejector
firmly into the hole to push the SIM card tray out.
2. Slowly pull the SIM card tray out of the tray slot.
3. Place the SIM card into the SIM card tray.
4. Plug the SIM card tray back into your device.
* Use the original Nano-SIM card. Non-original cards may cause damage.
Booting up your OnePlus device
Press and hold the power button for a few seconds to boot up the phone. If your phone does
not power on, you may need to charge it.
Setup Wizard
When you first boot up the phone (or after a factory reset), the Setup Wizard lets you
customize all features, including language, software buttons, gestures, fingerprint unlock, and
other features. If you want to change these later, you can do so after setting up the phone in
the Settings app.
Battery and charging
You will need to charge the phone when you first get it or if you have not used it for a
long time.
Safety Information
1. To ensure your safety and avoid damaging the device, only use the official charger and
USB cable.
2. OnePlus device supports the USB Type-C cable.
3. Unplug the charger after you finish charging to avoid wasting electricity.
4. Do not place anything on your phone while it is charging.
To Next Page
Loading...
Need help?
General
