OnePlus 8T User Manual

11
Setting up your device
Insert SIM card
1. Insert the SIM Tray Ejector into the small hole
on the SIM card holder. Press the ejector
firmly into the hole to push the SIM card tray
out.
2. Slowly pull the SIM card tray out of the tray
slot.
3. Place the SIM card into the SIM card tray.
4. Plug the SIM card tray back into your device.
* Use the original Nano-SIM card. Non-original
cards may cause damage.
Booting up your OnePlus 8T
Press and hold the power button for a few
seconds to boot up the phone. If your phone
does not power on, you may need to charge it.
Setup Wizard
When you first boot up the phone (or after a
factory reset), the Setup Wizard lets you
customize all features, including language,
software buttons, gestures, fingerprint unlock,
and other features. If you want to change these
later, you can do so after setting up the phone
in the Settings app.

OnePlus 8T Specifications

General

Resolution	1080 x 2400 pixels
Processor	Qualcomm Snapdragon 865
Front Camera	16 MP
Battery	4500 mAh
Charging	65W Warp Charge
Dimensions	160.7 x 74.1 x 8.4 mm
Weight	188g
SIM	Dual SIM (Nano-SIM, dual stand-by)
Colors	Aquamarine Green, Lunar Silver
Display	6.55-inch Fluid AMOLED, 120Hz
RAM	8GB / 12GB
Storage	128GB or 256GB
Rear Camera	48MP (wide) + 16MP (ultrawide) + 5MP (macro) + 2MP (monochrome)
Operating System	OxygenOS based on Android 11
Connectivity	5G, Wi-Fi 6, Bluetooth 5.1, NFC