•During SAR testing, this device was set to transmit at
its highest certified power level in all tested frequency
bands, and placed in positions that simulate RF
exposure in usage against the head with no
separation, and near the body with the distance of 15
mm.Although the SAR is determined at the highest
certified power level, the actual SAR level of the
device while operating can be well below the
maximum value. This is because the device is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
• The exposure standard for wireless devices
employing a unit of measurement is known as the
Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.
This device is complies with SAR for general
population /uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and has been tested in accordance with
To Next Page
Loading...
Need help?
General
