OneTouch FASTTAKE - Page 19

10
Press the C button to select the correct
code. Each time you press and release
the C button, the number will increase by
one. To move faster, simply press and
hold the C button. After you have
selected the correct code number, it will
flash for three seconds and then appear
solid for three seconds. Then the
R
symbol will appear, indicating that the
OneTouch
®
FastTake
®
System is ready
for testing.
Code the Meter.
STEP 3
(Example)
(Example)
DCO_05244004A_OTFT_OB_US 6/30/03 10:38 AM Page 10