OneTouch Select PLUS User Manual

10
Test principle
Glucose in the blood sample mixes with the enzyme
Glucose Oxidase (see page130) in the test strip and
a small electric current is produced. The strength of this
current changes with the amount of glucose in the blood
sample. Your meter measures the current, calculates your
blood glucose level, displays the blood glucose result, and
stores it in its memory.
Use only OneTouchSelect® Plus Control Solutions and Test
Strips with the OneTouch Select® Plus Meter.

OneTouch Select PLUS Specifications

General

Measurement Range	20-600 mg/dL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Automatic Shutoff	2 minutes after last action
Battery	1 CR2032 lithium battery
Operating Conditions	10%-90% RH
Storage Conditions	10-90% relative humidity
Weight	Approx. 52.5 g (with battery)