OneTouch Select PLUS User Manual

3
Take a test
59
Test with control solution
OneTouchSelect® Plus Control Solution is used to check
that the meter and test strips are working together
properly and that the test is performing correctly. (Control
solution is available separately.)
NOTE:
• When you first open a new vial of control solution,
record the discard date on the vial label. Refer to the
control solution insert or vial label for instructions on
determining the discard date.
• Tightly close the cap on the control solution vial
immediately after use to avoid contamination or
damage.

OneTouch Select PLUS Specifications

General

Measurement Range	20-600 mg/dL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Automatic Shutoff	2 minutes after last action
Battery	1 CR2032 lithium battery
Operating Conditions	10%-90% RH
Storage Conditions	10-90% relative humidity
Weight	Approx. 52.5 g (with battery)