OneTouch Select PLUS User Manual

2
Set up your system
30
Setup complete
Setup complete appears on the
screen. Your meter is now ready
for use.
Press
to return to the Main
Menu screen. See page62.
NOTE: If the meter was turned on by inserting a test
strip, the Apply Blood screen appears instead of the
Main Menu.
A Saved screen will appear to
confirm the low and high limits
displayed are now stored in the
meter.

OneTouch Select PLUS Specifications

General

Measurement Range	20-600 mg/dL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Automatic Shutoff	2 minutes after last action
Battery	1 CR2032 lithium battery
Operating Conditions	10%-90% RH
Storage Conditions	10-90% relative humidity
Weight	Approx. 52.5 g (with battery)