OneTouch Select PLUS User Manual

3
Take a test
44
6. Insert a test strip to turn
the meter on
Insert a test strip into the
test strip port with the
contact bars facing you.
No separate step to code
the meter is required.
When the Apply Blood screen
appears on the display, you
can apply your blood sample
to the test strip.

OneTouch Select PLUS Specifications

General

Measurement Range	20-600 mg/dL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Automatic Shutoff	2 minutes after last action
Battery	1 CR2032 lithium battery
Operating Conditions	10%-90% RH
Storage Conditions	10-90% relative humidity
Weight	Approx. 52.5 g (with battery)