OneTouch Select PLUS User Manual

3
Take a test
46
Applying blood and reading results
1. Prepare to apply the
sample
Keeping your finger
extended and steady, move
the meter and test strip
toward the blood drop.
Do Not apply blood on the top
of the test strip.
Do Not hold the meter and
test strip underneath the
blood drop. This may cause
blood to run into the test strip
port and damage the meter.
Do Not allow blood to enter
the Data Port.

OneTouch Select PLUS Specifications

General

Measurement Range	20-600 mg/dL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Automatic Shutoff	2 minutes after last action
Battery	1 CR2032 lithium battery
Operating Conditions	10%-90% RH
Storage Conditions	10-90% relative humidity
Weight	Approx. 52.5 g (with battery)