OneTouch Select PLUS User Manual

3
Take a test
49
CAUTION:
You may get an ERROR 5 message if the blood sample does
not fill the confirmation window completely. See page119.
Discard the test strip and re-start the test process.
3. Wait for the confirmation window to fill completely
The blood drop will
be drawn into the
narrow channel and the
confirmation window
should fill completely.

OneTouch Select PLUS Specifications

General

Measurement Range	20-600 mg/dL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Automatic Shutoff	2 minutes after last action
Battery	1 CR2032 lithium battery
Operating Conditions	10%-90% RH
Storage Conditions	10-90% relative humidity
Weight	Approx. 52.5 g (with battery)